From scratch
Reach-in closet system.
Double hanging, a drawer tower and a top shelf, sized to the opening you have.
- Width
- 1,800 mm
- Height
- 2,300 mm
- Depth
- 580 mm
Starting size in 18 mm plywood, veneered or painted. Every measurement can change.
Start from this templateMake it yours
Change the numbers to match your room.
About this template
A reach-in closet works harder when it is split into zones: short clothes hung in two tiers, long clothes on one rail, and a tower of drawers and shelves between them. This plan starts from that layout and resizes it to the opening you have.
It stands on the floor and fixes back to the wall, so nothing hangs from plasterboard alone.
What you can change
- Closet width, height and depth
- Mix of long hanging, double hanging, shelves and drawers
- Number of drawers in the tower
- Plywood or MDF, veneered or painted
Related templates
Or start from one of these.
- From scratch
Fitted wardrobe
Four bays behind full-height doors, with hanging space, shelves and internal drawers.
- Uses IKEA PAX
PAX fitted wardrobe
Floor-to-ceiling fronts and scribed filler panels turn three frames into a fitted wall.
- From scratch
Alcove bookshelves
Scribed into a chimney-breast alcove: cupboard below, adjustable shelves above.
- From scratch
Freestanding bookcase
A simple open bookcase with fixed shelves. The right first project.
What would you build if it only had to fit your room?
Show Caminu your room and describe the piece. You get the 3D model, the cut list and the assembly guide.