From scratch
Fitted wardrobe.
Four bays behind full-height doors, with hanging space, shelves and internal drawers.
- Width
- 2,800 mm
- Height
- 2,400 mm
- Depth
- 650 mm
Starting size in 18 mm oak-veneered plywood. Every measurement can change.
Start from this templateMake it yours
Change the numbers to match your room.
About this template
This is the piece Caminu was first built around: a wall of full-height doors with everything behind them planned to the millimetre. Each bay is a separate carcass, so the wardrobe goes up the stairs in parts and is joined in the room.
Doors and drawers are modelled moving, not just closed. You can open every door in the 3D view and check that the drawers clear the hinges before anything is cut.
What you can change
- Overall width, height and depth
- Number of bays and what goes in each
- Door gaps and handle style
- Internal drawers, shelves and rails
Related templates
Or start from one of these.
- From scratch
Reach-in closet system
Double hanging, a drawer tower and a top shelf, sized to the opening you have.
- Uses IKEA PAX
PAX fitted wardrobe
Floor-to-ceiling fronts and scribed filler panels turn three frames into a fitted wall.
- From scratch
Alcove bookshelves
Scribed into a chimney-breast alcove: cupboard below, adjustable shelves above.
- From scratch
Freestanding bookcase
A simple open bookcase with fixed shelves. The right first project.
What would you build if it only had to fit your room?
Show Caminu your room and describe the piece. You get the 3D model, the cut list and the assembly guide.